MasterCool 69789 Instrucciones Para El Uso página 13

Press F4 ↵ to confirm STANDARD VEHICLE or press the DOWN ARROW ↓ and then F4 ↵ to select HYBRID VEHICLE.
NOTE: When HYBRID VEHICLE is selected the OIL phase of the AUTOMATIC PROCEDURE is disabled.
The following message appears:
Press F4 ↵ to continue
Press F4 ↵ to continue, a pop-up window with vacuum settings will be displayed:
Set the vacuum time by keying in the desired time. To accept the time value that is already there, press F4. The machine will automatically perform
a 2 minute automatic leak check when the time value is 11 minutes or longer. Automatic leak check will start after 9 minutes of vacuuming. If a
leak is detected, the machine will notify the operator that a leak was detected and will not continue vacuuming. If no leak is detected, the machine
will continue vacuuming for the time remaining.
1) Press F4 ↵ to skip Oil Refill.
2) Scroll to "Automatic Oil" with the DOWN ARROW ↓ and confirm it by pressing F4 ↵.
SELECT
■
Standard vehicle
Hybrid vehicle
Gas Filling
warning
using pag oil or
■
tracer in hybrid vehicles can damage the
compressor
Gas Filling
use specific oil
with a separate
■
device
Press ENTER
Gas Filling
vacuum
■
Gas Filling
Oil
Automatic Oil
■
Oil
Gas Filling
↵
↑
↓
xxg
↵
↑
↓
xxg
↵
↑
↓
xxg
↵
20 MIN
↑
↓
xxg
↵
No
↑
xxcc
↓
xxg
13