NOTE: When the Vacuum operation is completed the system will automatically reintegrate with the same quantity of oil extracted during
Recovery.
3) Scroll to "Oil" with the DOWN ARROW ↓, then use the keys 0 to 9 to type the volume of oil to be automatically reintegrated after
Vacuum, then press F4 ↵ to confirm.
NOTE: cc = ml
The following summary screen will be displayed:
1. Set the quantity of refrigerant required for the A/C system to be charged. Following are examples for each set of units.
Lb, the display will have 4 digits, two digits then a decimal point and then two digits. The cursor moves from the left to the right. If the desired
charge is 1.75 lbs, then you will enter 0 1 7 5.
Oz, the display will have 3 digits. The cursor moves from the right to the left. If the desired charge is 36 oz's, then you will enter 0 3 6.
Gr, the display will have 5 digits. The cursor moves from the right to the left. If the desired charge is 980 grams, the you will enter 9 8 0.
Kg, the display will have 3 digits, two digits then a decimal and then one digit. The cursor moves from the right to the left. If the desired charge is
1.5 Kg's then you will enter 1 5.
Lb-oz, the display will have 4 digits, two digits then a colon and then two digits. The cursor moves from the left to the right. If the desired charge
is 1 lb's 7 oz's then you will enter 0 1 0 7.
NOTE: When working with A/C systems with a single high-pressure (RED) coupling, set the charging quantity 3 oz. (0.19 lb or 0.85 g) more than the
required quantity, since in this case it will be impossible to recover the residual refrigerant from the hoses after charging.
NOTE: In most cases, the quantity of refrigerant being charged into the A/C system is given on a data plate inside the engine compartment of the
vehicle. If you do not know the correct quantity, consult the relevant manuals.
2. DATABASE ADVANCE: Press the DATABASE [DB] key, the following screen will appear on the display.
14
Oil
Automatic Oil
■
Oil
Gas Filling
Oil
Automatic Oil
■
Oil
Gas Filling
AUTOMATIC PROCEDURE
Vacuum
■
Oil
Ref Charge
DB
AUTOMATIC PROCEDURE
Vacuum
■
Oil
Ref Charge
DB
↵
No
↑
xxcc
↓
xxg
↵
No
↑
30cc
↓
xxg
↵
20min
↑
30cc
xxg
↓
↵
20min
↑
30cc
1.75lb
↓