Remote Control; Button Description - Sony KLH-W26 Manual De Instrucciones

Remote Control

Button Description

MUTING DISPLAY POWER
MODE
SOUND PICTURE WIDE
INPUT
V2 V3
V1
V4 V5
VOL
POWER
SAVING MENU
FREEZE SLEEP
Tip
The VOL + button has a tactile dot. Use it as a reference when operating the display.
Note
Insert two size AA (R6) batteries (supplied) by matching the 3 and # on the batteries to the diagram inside the remote control's
battery compartment.
1 POWER button
Press to switch the display on/off (standby).
2 DISPLAY button
Press to display the currently selected input signal information and
the "Wide Mode" setting on the screen. Press again to hide them. If
this displayed information is left undisturbed for a short time, it will
disappear automatically. If "Sleep Timer" is set, the remaining time
for "Sleep Timer" can be displayed by pressing DISPLAY button.
3 WIDE button
Press to change the aspect ratio in "Wide Mode". See page 13.
4 PICTURE button
Selects "Picture Mode". Each press toggles between "Vivid",
"Standard", and "Custom".
5 INPUT V1-V5 buttons
Press the following buttons to select an input signal from the
equipment connected to input connectors.
• V1 button: HD15 (The RGB signal or component signal is selected
automatically in accordance with the connected equipment.)
• V2 button: HDMI 1
• V3 button: HDMI 2
• V4 button: OPTION (When an optional adaptor is installed.)
• V5 button: Not for use.
6 VOL +/– button
Press to adjust the volume.
Push and slide to open
GB
11
GB