Picture Settings - Sony KLH-W26 Manual De Instrucciones

Picture Settings

For Video Input
: :
Picture Mode
Picture Mode Reset
Picture
Brightness
Color
Hue
Color Temp.
Sharpness
Noise Reduction
CineMotion
Tip
You can alter the "Picture" settings ("Picture", "Brightness", "Color", etc.) for each "Picture Mode".
18
GB
: :
"Vivid": Select for enhanced picture contrast and sharpness.
"Standard": Select for standard picture settings.
"Custom": Allows you to store preferred settings.
Tips
• To change from one "Picture Mode" option to another, you can also use PICTURE on the
remote control instead.
• You can alter the "Picture Mode" options for each input.
Resets all settings and adjustments currently selected in "Picture Mode" ("Vivid",
"Standard", "Custom") to the default setting (except for the options grayed out).
Adjust to increase or decrease picture contrast.
Adjust to brighten or darken the picture.
Adjust to increase or decrease color intensity.
Adjusts the color tones of the picture.
Note
"Hue" is not available when the input is Video or S Video and the color system of video signal
is not NTSC.
"Cool": Select to give the white colors a blue tint.
"Neutral": Select to give the white colors a neutral tint.
"Warm": Select to give the white colors a red tint.
Adjust to sharpen or soften the picture.
Select to reduce the noise level of connected equipment. Select from "On" or "Off".
Select "Auto" to optimize the screen display automatically detecting film content
and applying a reverse 3-2 pull down or 2-2 pull down process. Moving picture will
appear clearer and more natural looking. Select "Off" to disable the detection.
To highlight an option and to change settings, press
V v B b
/ / / .
Press to confirm the selection.
The "Picture" settings include the following options: