Pari SINUS2 Instrucciones De Uso página 62

Danger of a device defect
Comply with the following instructions to avoid a device defect:
– Make sure that the local supply voltage matches the voltage
data marked on the compressor identification label.
– To avoid overheating of the compressor,
– Never operate the compressor while it is in a bag,
– Never cover the compressor while it is operating,
– Make sure that the ventilation slits on the compressor are
unobstructed at all times while it is operating.
– Always pull the power cord by the power plug, not the cable,
to disconnect it from the socket.
– Make sure that the power cord is never kinked, pinched or
jammed. Do not pull the power cord over sharp edges.
– Keep the compressor and the power cord away from hot
surfaces (e.g., stove top, electric fire, open fire). Direct heat
may damage the compressor housing or the insulation on
the power cord.
Impairment of treatment due to electromagnetic
interference
Use only original spare parts and original accessories from
PARI. The use of third party products can result in increased
emissions of electromagnetic interference or reduced resis-
tance of the PARI compressor.
Hygiene
Observe the following hygiene instructions:
– Do not use product components unless they have been
thoroughly cleaned and dried. Contamination and residual
moisture encourage the growth of bacteria, which increases
the risk of infection.
– Before every use and cleaning, wash your hands
thoroughly.
– It is essential to clean and dry all product components be-
fore the first application as well.
– 10 –