Care Of The Pari Sinus Tubing System; Replacing The Air Filter - Pari SINUS2 Instrucciones De Uso

4.3 Care of the PARI SINUS tubing system
Dry the PARI SINUS tubing system after every use:
• Insert the matching tubing connector on the first of the two
tubes in the compressed air connector on the compressor.
• Switch the compressor on.
• Allow air to blow through the tube until the air has removed
all moisture from the tube.
• Switch the compressor off.
• Disconnect the tube from the compressor, and attach the
other tube to the compressed air connection.
• Repeat the process as described for the first tube.

4.4 Replacing the air filter

The air filter must be checked at regular intervals (after every
10th application). If it is discoloured brown or grey, or if it is
damp or clogged, it must be replaced.
In all cases, it must be replaced after 200 operating hours (ap-
prox. 1 year).
The air filter cannot be cleaned and then reused!
Take the air filter out:
• Pull the filter holder out of the
compressor. Use a small
screwdriver, for example, to
prise the filter holder carefully
out of the compressor.
Replace the air filter:
• Pull the old air filter out of the filter holder and fit the new fil-
ter in its place.
NOTE! Only use air filters provided by the manufacturer or
dealer for operating your compressor. If air filters that are
not designed for the compressor are used, the compressor
may be damaged.
• Insert the filter holder back in the compressor.
– 30 –