KMD 06
Digital multimeter
Overview
Warning
To avold electrical shock or personal injury, please read all safety
information,warnings and pracautions before using the meter.
The KMD 06 is a small, safe and reliable 3 ½ digit handheld multimeter.
This meter can measure AC/DC voltage, AC/DC current, resistance, diode,
continuity, battery test and non-contact voltage tests. This tool is ideal for
professionals and hobbyists alike.
Safety information
Safety standards
The KMD 06 meets the following safety standards: EN61010-1 standards for
electronic testing instruments. This meter meets EN61010-1 standards for
CAT III 600V installations and a pollution degree of 2.
• The protection provided by the meter can only be ensured if all safety
procedures are strictly followed.
• The safety symbols on the meter are to advise of potential dangerous
situations. Caution is required when measuring close to the meter's safety
limits.
• Never exceed the protection limit values indicated in the specifications for
each range of measurement.
Precautions
• To avoid electrical shock or personal injury, observe and follow all safety
precautions.
• Check the meter for damage before use. Do not use if any damage is
observed.
• Check de test leads for cracks or exposed wires before using the meter.
Replace if necessary.
• Ensure the meter works properly by testing a known voltage source first. If
not working properly, the protective equipment may be damaged, have the
meter serviced before using.
• Never measure voltages that may exceed the protection limit indicated on
Instructions manual |
16
www.grupotemper.com