Replacing The Fuse - koban KMD 06 Manual De Instrucciones

KMD 06
Digital multimeter
Use the following steps to replace the battery:
1. Turn off the meter.
2. Remove test leads.
3. Unscrew and remove battery cover from back of the meter.
4. Replace used battery with a new 9V battery.
5. Replace battery cover and fasten securely.

Replacing the fuse

Warning
Turn off the meter and disconnect test leads before opening back cover to
avoid electrical shock and personal injury.
Use the following steps to replace the fuse:
1. Turn off the meter an remove test leads.
2. Remove outer holster.
3. Unscrew and remove back cover from the meter.
4. Replace blown fuses with same amp/voltage ratings.
5. Replace back cover and fasten securely.
6. Replace outer holster.
Instructions manual | 26 www.grupotemper.com