Declaration Of Conformity - Sun Enterprise 450 Notas Sobre El Producto

Declaration of Conformity

Compliance ID: Q36
Product Name: Sun Enterprise 450, Ultra 450 Creator, Ultra 450 Creator3D, and Ultra 450 Elite3D families
EMC
USA – FCC Class A
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This equipment may not cause harmful interference.
2. This equipment must accept any interference that may cause undesired operation.
European Union
This equipment complies with the following requirements of the EMC Directive 89/336/EEC:
EN55022 / CISPR22 (1985)
EN50082-1 IEC801-2 (1991)
IEC801-3 (1984)
IEC801-4 (1988)
IEC801-5
EN61000-3-2/IEC1000-3-2 (1994)
Safety
This equipment complies with the following requirements of the Low Voltage Directive 73/23/EEC:
EC Type Examination Certificates:
EN60950/IEC950 (1993)
EN60950 w/ Nordic Deviations
Supplementary Information
This product was tested and complies with all the requirements for the CE Mark.
Burt Hemp
Manager, Power and Compliance Engineering
Sun Microsystems, Inc.
One Network Drive UBUR03-213
Burlington, MA 01803-0903 USA
Tel: (781) 442-0006
Fax: (781) 442-1673
Class A
8 kV (Direct), 15 kV (Air)
10 V/m, 80% AM at 1KHz
4.0 kV Power Lines, 1 kV Signal Lines
2 kV Power Lines (L-L, L-G)
1 kV Signal Lines (L-G, Shield-G)
Pass
TUV Rheinland Certificate No: S9771525
CB Scheme Certificate No: UL1859-113363/USA
June 8, 1999
DATE
Integrity Design & Test Services, Inc.
Report Nos: 61419.E2, 61233.E3
Curtis-Straus, LLC. Report No: E990396-1
John Shades
Quality Assurance Manager
Sun Microsystems Limited
Springfield, Linlithgow
West Lothian, EH49 7LR
Scotland, United Kingdom
Tel: 1506 670000
Fax: 1506 672323
Declaration of Conformity
June 8, 1999
DATE
iii