Operation By Switch; Led-Display - GUTMANN TYP 9200EM Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 54
EN
Operation via switch
Button
Push
b
1x
b
2x
b
3x
b
4x
b
> 3sec.
a
1x
a
1x long
a
1x
b
> 5 sec.

LED-Display

Information on the operating status of the cooker hood :
LED
c:
Display of operating status fan ON / OFF
c:
flashing: display of automatic follow-up time
(the hood automatically switches down by one power level every 5 minutes
.
until it is finally switched off)
1
Fan output level 1 (low motor output)
Press button b 1x
2
Fan output level 2 (medium motor output)
Press button b twice
3
Fan power level 3 (high motor power)
Press button b three times
i
Intensive level (motor automatically switches back to level 3 after 5 minutes)
Press button b 4x
f
Filter saturation display
When the red LED lights up / flashes, the metal filters must be cleaned (see
section Cleaning and care). The filter saturation indicator lights up after max.
.
15 operating hours (even when not cooking). After cleaning, press the reset
button (b) for about 10 seconds until the LED goes out. ( Only possible when
the device is switched on - TW function is deactivated when the red LED flashes ! )
22
Fan ON Motor runs at level 1, LED (c) + 1 on.
Motor runs at level 2, LED (c) + 1-2 on.
Motor starts at level 3, LED (c) + 1-3.
Motor starts at intensive level, LED (c) + 1-4 starts.
Motor automatically switches back to level 3 after 5 minutes.
Colour temperature adjustment ( only TW version )
Pressing and holding button (b) will start the color change ( 2700 -
6500K ) and the last value will also be stored when
( only available when the engine is stopped )
Execution
Motor switches off
Lighting OFF
Lighting dimmer-funktion
Lighting OFF
released.
rocker switch

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido