System Operating Instructions; Preparing Your Current X-Ray Equipment - GENDEX DenOptix QST Manual Del Usuario Y De Servicio

System operating instructions

5.1

Preparing your current X-ray equipment

The DenOptix QST System produces X-ray images of high quality and low noise yet offers a
dose reduction in intraoral surveys up to 80% of the dose required for D-speed intraoral film.
More details on how this technology works can be found in appendix A. Almost any intrao-
ral or panoramic X-ray unit can be used with the DenOptix QST system. There is no need to
purchase a new one.
The imaging plates produce excellent diagnostic images over a wide range of exposures. With
the DenOptix QST system, it is possible to get diagnostic images at the same exposure time
you use for X-ray film or as much as 80% reduction of the dose required for D-speed film.
This means that it is more difficult to over- or under-expose an image. We recommend, how-
ever, that you start with the exposure times outlined in the table below.
Intraoral equipment
Exposure times indicated hereunder are estimates that must be verified and adjusted
depending on specific and actual local conditions, e.g. supply voltage, X-ray tube yield, timer
accuracy, beam filtration, etc.
User and Service Manual
27
5
Doc # M010-004WWE July 2005