Turning Off; Standby - Leader FLOWMIX Serie Manual De Utilización

4.4 TURNING OFF

After using and refilling the FLOWmix, the control panel must be set as shown above.
➢ Proceed as follows :
- Flush valve on FOAM POSITION.
- Selector valve OFF
- Metering valve OFF.

4.5 STANDBY

At the bottom of each FLOWmix tank is a drain valve to allow water in the tank to be
drained for freeze protection and also to make the unit lighter to transport.
➢ Proceed as follows :
Set the three-way valve to refill. This will allow air to enter the tank and expel
-
the water from it.
Turn the drain valve anticlockwise.
-
: additive injection stops.
12