36. Do not attempt to disassemble or modify this product.
37. Store at room temperature in a dry area. Do not expose to sunlight,
moisture, or extreme temperatures for prolonged periods of time.
38. Caution: Exposure to certain chemicals can damage unit causing
corrosion, crazing, and cracking of housing.
39. When the device is used as a stirrer; carefully note the position of the
container placed on the lid of the device and make sure one of the
flexible disks is placed between the container and the lid to minimize
movement/slippage of the container. Stirring efficiency is maximized
when the container and lid are concentric. Refer to concentric groove
on the lid to help locate the container.
Warning!
If the unit is not used as recommended by the manufacturer, the overall
safety will be impaired.
Warning!
Check MSDS, wear required Personal Protective Equipment, and observe
all applicable local and national regulations before dispensing and
disposing of hazardous sample.
Warning!
This product does not contain bio-seals as per IEC/EN/CSA 61010-2-020
and cannot provide any level of containment in case of a spill or release
of toxic, radioactive, or pathogenic micro-organisms. These materials
should not be used with this product.
Warning!
The laboratory procedure should ensure that no person or hazardous
substances are present within a 12" (30cm) zone around the device when
operating.
Technical Data
Supplied Equipment (Spare part item numbers):
— MagFuge combination centrifuge and stirrer
— Universal AC power adapter (120527)
— Set of 4 Universal mains cables for AC adapter (100502)
— Standard 12-Tube rotor for 1.5 - 2.0 mL tubes, 12,500 rpm max
(120622)
— 6-Tube rotor for 5 mL tubes, 12,500 rpm max (120623)
— Stirrer rotor with installed magnets, 2500 rpm max (120624)
— 2 bags, each containing 6 ea. Tube adapters 0.2 mL & 0.5 mL, only for
standard 12-Tube rotor, 12,500 rpm max. (120350)
— 2 ea. Stir bar 40x12mm (120675)
— 2 ea. Silicone lid mat (120682)
5