Wiring - Craftmade Ellington E-TIT52ABZ5LKRCI Guia De Instalacion

6. Wiring.

CAUTION: Be sure outlet box is properly
grounded and that a ground wire (GREEN or
Bare) is present.
Make sure all electrical connections comply with
Local Codes or Ordinances and the National
Electrical Code. If you are unfamiliar with
electrical wiring or if the house/building wires
are different colors than those referred to in the
diagram to the right, please use a qualified
electrician.
When downrod is secured in place on the
hanging bracket, wire the receiver with wire
connectors provided as shown in diagram at
right.
Tip: While you are wiring, keep in mind that
wires must not obstruct receiver from sliding
into hanging bracket.
* Wrap each wire connector separately with
electrical tape as an extra safety measure.
Gently insert receiver (flat side up) into
hanging bracket and carefully push taped
wire connectors into outlet box. Let antenna
rest outside of hanging bracket.
white supply wire
black supply wire
blue
white
black
from fan
from receiver
black
white
blue
page 7
ground (green
or bare)
ground (green
or bare)
black
from ceiling
from receiver
black
AC IN L
white
AC IN N
*
antenna
receiver
white