Emulation; Date & Time - Carl Valentin FLEXICODE Instrucciones Abreviadas Y Recomendaciones De Seguridad

Key:
Port test

Emulation

Keys: , , ,
Protocol
Key:
Printhead resolution
Key:
Drive mapping
Key:
PJL (Printer Job Language) Status information regarding the print order can be indicated.
Date & Time
Keys: , , ,
Set date and time
Key:
Summertime
Key:
Start of summertime
(format)
Check whether the data are transferred via the interface.
Press the and keys to select standard (on). Press the
any port (COM1, LPT, USB, TCP/IP) is printed.
, , , ,
CVPL: Carl Valentin Programming Language
®
ZPL: Zebra Programming Language
Press keys and to select the protocol. Press key
module is restarted and ZPL II
®
At activated ZPL II emulation the printhead resolution of the emulated device must be set.
NOTICE!
If the printhead resolution of the Zebra
device, then the size of objects (e.g. texts, graphics) complies not exactly.
®
The access to Zebra drives is rerouted to the corresponding Valentin drives.
NOTICE!
As the build-in fonts in Zebra
cause small differences in the text image.
, , , ,
The upper line of display shows the current date, the second line the current time.
With keys and you can change to the next or previous field. With keys
can increase and/or decrease the displayed values.
On: The module automatically adjust clock for daylight saving changes.
Off: Summertime is not automatically recognized and adjusted.
Select the format in which you want to define beginning summertime.
DD = day
WW = week
WD = weekday
MM = month,
Y = year
next day = only next day is taken into consideration
, , ,
®
commands are transformed internally into CVPL commands.
®
printer differs from that of the Valentin
®
printers are not available in Valentin devices this can
, , ,
English
key and the data sent via
to confirm the selection. The
,
and
Flexicode
you
127