Functional Description - Binzel BRS-FP Instructivo De Servicio

BRS-FP
4.1 Transport
Although the items delivered are carefully checked and packaged, it is not possible to fully exclude the risk
of transport damage.
Goods-in inspection Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
In case of complaints If the delivery has been damaged during transportation, contact the last carrier immediately. Retain the
packaging for potential inspection by the carrier.
Packaging for returns Where possible, use the original packaging and the original packaging material. If you have any
questions concerning the packaging and/or how to secure an item during shipment, please consult your
supplier.
Tab. 10 Transport
4.2 Storage
Physical storage conditions in a closed environment:
 Tab. 1 Ambient conditions during operation on page EN-6

5 Functional description

The reamer, which is to be adapted to the gas nozzle and torch geometry, is driven by a pneumatic motor
and moved by the guide block in linear direction of the axis of rotation. To adjust the immersion depth of
max. 50 mm, the pneumatic motor is clamped in the guide block.
For cleaning, the torch is clamped with the cylindrical part of the gas nozzle in a precisely defined position
in the clamping device. No stress is transmitted to the robot due to the four-point bearing. The set of clamping
jaws must be adapted to the external diameter of the gas nozzle, and can be replaced for all sizes from
Ø15 - 30 mm.
The control system required for the workflow is attached to the housing in the form of a printed circuit board
(PCB).
For operation, it requires externally applied voltage of 20 - 30 V DC, as well as a robot output and a robot
input.
All add-on components (valves, PCB, initiators) are protected against external influences by a covering
hood.
5 Functional description
EN - 9