Dash Disassembly - Metra 95-7345B Instrucciones De Instalación

1. Unsnap and remove trim from around
top center to passenger side dash.
(Figure A)
2. Unsnap panel from outside edge of
driver's side dash. (Figure B)
3. Remove (2) screws from knee panel
and pull top of panel back so it doesn't
overlap the instrument cluster. (Figure C)
4. Remove (2) screws from the driver's side
vent trim and remove. (Figure D)
(Figure A)
2

DASH DISASSEMBLY

(Figure B)
(Figure C)
(Figure D)
5. Remove (5) screws from instrument
cluster and remove. (Figure E)
6. Remove (4) screws from the climate
controls and remove. (Figure F)
7. Remove (6) screws securing the radio
trim panel and remove. (Figure G)
8. Remove (4) screws securing the factory
radio chassis and remove it. (Figure H)
Continue to Kit Preparation
(Figure E)
(Figure F)
(Figure G)
(Figure H)
|
1.800.221.0932 MetraOnline.com