Philips AVENT SCF862 Manual Del Usuario página 15

Ocultar thumbs Ver también para AVENT SCF862:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Blending only
Caution
• Ensure the blade unit including the blade shaft seal is assembled
correctly. The flat side of the blade shaft seal should face upwards
(fig.
).
x
• Always make sure that the lid of the blending jar is correctly locked in
place while the appliance is in use.
Note
• Ingredients need to be washed, peeled and cut into small cubes no
bigger than 1cm before you blend.
1
Remove the blending jar from the main unit and push the lid tab to
open the jar. (fig.
2
Pour the chopped food into the blending jar without the steaming
basket. Do not exceed the MAX amount of 400 ml.
3
Put the blending jar lid back and lock it in place (fig.
blending jar to ensure the ingredients are evenly distributed.
4
Place the blending jar back on the main unit and lock it securely in
place.
5
To start blending, turn the knob to "blend" position until the
ingredients are blended to the consistency of your choice (fig.
Note
• If the ingredients stick to the wall of the jar, or if the blended
ingredients are still too solid, release the blending knob, remove the
jar from the main unit, and loosen the ingredients with the spatula,
add some drinking water until the blended food has the right
consistency for your baby's age.
Caution
• Do not let the appliance blend for more than 30 seconds at a time.
If you have not finished blending after 30 seconds, release the knob
to stop blending and wait a few seconds before you continue. If the
main unit becomes hot, let it cool down for a few minutes before you
continue.
6
Unplug the appliance.
7
Remove the jar from the main unit and open the jar lid (fig.
& fig.
).
b
c
ENGLISH
17
). Shake the
q
).
r
).
n

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Scf862

Tabla de contenido