Performing A Control Solution Test - Fora GTel Manual Del Propietário

 your blood glucose and β-ketone test results are not consistent with
how you feel, or if you think the results are not accurate,
 practicing the testing process, or
 you dropped or think you have damaged the meter.

Performing a Control Solution Test

3. Apply control solution
Shake the control solution vial thoroughly before use. Squeeze out a
drop and wipe it off, and then squeeze out another drop and place it on
the tip of the vial cap. Hold the meter in an angled position so that the
absorbent hole of the test strip touches the drop. Once the confirmation
window fills completely, the meter will begin counting down. To avoid
contaminating the control solution, do not directly apply control solution
onto the strip.
14
1. Power on the meter
2. Tap Measure or insert the test strip
to start a measurement
Follow the instructions on the screen to
insert a test strip into the meter. Wait
for the meter to display "Take a blood
sample".