Meter Storage; Caring For Your Test Strips - Fora GTel Manual Del Propietário

NOTE:
 Do NOT clean and disinfect the meter while performing tests.
 If the meter is being operated by a second person, the meter and lancing
device should be decontaminated prior to use by the second person.
 Do NOT allow cleaning and disinfecting solution to get in the test slot.
 If you do get moisture in the test strip slot, wipe it away with a corner of tissue.
 Always dry the meter thoroughly before using it.
 Do not spray the meter directly with cleaning solutions especially those
containing water (i.e. soapy water), as this could cause the solution to enter the
case inside and damage the electronic components or circuitry.

Meter Storage

 Storage conditions: -4°F to 140°F (-20°C to 60°C), below 93%
relative humidity.
 Always store or transport the meter in its original storage case.
 Avoid dropping and heavy impact.
 Avoid direct sunlight and high humidity.

Caring for Your Test Strips

 Storage conditions: 35.6°F to 86.0°F (2°C to 30°C), and between
10% to 90% relative humidity for blood glucose test strips. 35.6°F to
86.0°F (2°C to 30°C), and between 10% to 85% relative humidity for
β-ketone test strips. Do NOT freeze.
 Store your test strips in their original vial only. Do not transfer to
another container.
 Store test strip packages in a cool dry place. Keep away from direct
sunlight and heat.
 After removing a test strip from the vial, immediately close the vial
cap tightly.
 Touch the test strip with clean and dry hands.
33