Fora GTel Manual Del Propietário página 32

NOTE:
 Poor signal quality may be caused by the service is busy,
or there is no base station nearby.
 If you receive poor signal quality, take the device to a spot
with a better reception and try again. Keep away from the
microwave or other devices that may interrupt the signal.
If Data Transmission Is Unsuccessful
If the internet signal is unstable, your device may not be able to
communicate with your FORA 24/7 account at that time. If the device
cannot communicate with your FORA 24/7 account, the following
message will appear:
"Poor signal"
In this case, you do not need to do anything since this will happen after
the next blood measurement and a reliable signal is obtained.
Meanwhile, your results will be stored in the logbook. You can also tab
24
(b) With the meter turned on, press Sync
to initiate transmission for test results
which have not been uploaded.
2. During transmission
When the arrow symbol shows up, the
data transmission has started. The
message Upload OK will appear when the
transmission is finished.
3. After transmission
The uploaded results will change colors to
indicate their statuses.