Torin BIG RED TRA8205B Manual Del Propietário página 13

WARNING: Jack is not self-lubricating. It will not operate safely without proper lubrication.
Storing the Jack
1. Place the handle in the upright position against the steel standard (column).
2. Raise the reversing latch until it locks in the UP position.
3. Store the jack in a upright position in a dry location, preferably indoors. If the jack is stored outdoors, or is
stored in a Loc-Rac or 4x4 RAC use a jack protector.
4. Store in a dry location, recommended indoors.
5. Mechanical jacks should be stored in an area where they will not be subjected to damage.
6. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided
in shall be followed.
7. Temperature - When mechanical jacks are to be used at temperatures above 140"F (60"C) or below -20"F
(-29"C), the jack manufacturer or a qualified person should be consulted.
8. Chemically Active Environments -The strength and operation of mechanical jacks can be affected by
chemically active environments such as caustic or acid substances or fumes. The jack manufacturer or a
qualified person should be consulted before mechanical jacks are used in chemically active environments.
9. Other Environments - The internal workings of jacks can be affected by high moisture, gravel or sand, silt,
grit, or other dust-laden air. Jacks subject to these environments should have their inner components
frequently cleaned, inspected, and lubricated.
Note: If the jack is stored outdoors, be sure to lubricate all parts before and after use to ensure the
jack stays in good working condition.
13