Troubleshooting - cecotec HYDROBOOST 10200 LIBERTY PRO Manual De Instrucoes

ENGLISH
the hose.
Remove the battery and store it separately if the device is not going to be used for a long time.

6. TROUBLESHOOTING

Problem
ECO indicator light flashes.
The device won't turn on.
Sudden power outage.
Low water content.
The device does not absorb
the water
The device takes longer to
absorb water.
Multi-function nozzle leaks.
Multi-function nozzle leaks.
44
HYDROBOOST 10200 LIBERTY PRO
Cause
Low battery.
Low battery.
Temperature too high,
overheating protection.
Filtering blockage that leads
to a poor water intake.
Inlet hose bent.
Water contains impurities
Water inlet's leakage.
Poor connection between
water inlet and water inlet's
connector.
The water inlet's filter is not
correctly assembled.
Device on Energy-saving
mode.
Multi-function nozzle is not
correctly assembled.
The nozzle is not correctly
assembled.
Solution
Charge the battery.
Charge the battery.
Turn the device again
once the temperature is
lower.
Clean the water inlet's
filter and the water inlet.
Replace or straighten the
inlet hose.
Replace the water.
Tighten the inlet's joint.
Reassemble the inlet and
outlet accessories.
Assemble it correctly.
Deactivate ECO mode and
switch to normal mode.
Insert the multi-function
nozzle in the device and
then rotate it.
Rotate the nozzle to the
indicating mark.