Technical Specifications - cecotec HYDROBOOST 10200 LIBERTY PRO Manual De Instrucoes

Why can't I charge the battery?
Why does the battery's charging time change?

7. TECHNICAL SPECIFICATIONS

Product reference: 05407
Product: HydroBoost 10200 Liberty Pro
Battery: 20 V DC, 2500 mAh, 40 Wh
Charger (Input): 100-240 V AC, 50/60 Hz, Max 1.2 A
Charger (Output): 20 V DC, 1000 mA
Rated Pressure: 2.4 Mpa (24 bar)
Max. Flow: 3 l/min (180 l/hour)
IP X5
Check if the charger and the battery are
compatible.
The battery can only be inserted into the
charger in one direction.
Turn the battery until it can be inserted
into the charger. When the charger's
indicator light turns red, it means it is
charging.
The charging time is affected by many
factors, but this does not mean the device
is defective.
If the battery is only partially discharged,
it will take less time to charge it back.
If the battery's temperature and the room
temperature are low, the battery will take
longer to charge.
If the battery is too hot, the overheating-
protection system will disconnect the
device automatically. If this happens,
unplug the device from the socket and the
battery from the charger and then start
charging it again after it cools down.
HYDROBOOST 10200 LIBERTY PRO
ENGLISH
45