Weinmann VENTIclick Descripción Del Aparato E Instrucciones De Uso página 11

Adapt breath humidifier
1. If necessary, detach the creased hose from the therapy unit by pressing the
locking button of the adapter.
2
1 4
Switching on breath humidifier
For details of how to operate the ventilation device, please consult the relevant
operating instructions for the therapy device.
1. Switch on the therapy device.
Humidifier
Setting heating level
To adjust the humidifier output, proceed as follows:
1. Close the tube system or put on the mask.
2. Press the humidifier onto the therapy device
6
from the front so that it clicks into place.
For this the inlet connection stub
ing element
noea unit.
Make sure that the locking system
place.
3. Snap the adapter of the creased hose into the
outlet connection stub
er. For this the locking button must point up-
wards.
2. Switch on the VENTIclick humidifier with the hu-
midifier button
humidifier button lights up. If you press the hu-
midifier button
tached, your therapy device will not switch this
function on.
LED
2. While VENTIclick is
til the window for adjusting the humidifier out-
put opens. The humidifier heat (level 1-6) is
adjusted by means of the knob (turn to right =
increases heat, turn to left = reduces heat).
Or press button
humidifier heat level.
4
must be aligned with the sleep ap-
6
on the breath humidifi-
. The green LED next to the
when no humidifier is at-
running
, press button
repeatedly to change the
Operation
2
and the heat-
1
snaps into
un-
EN
9