Attaching A H4I Humidifier; How To Use The Control Panel - ResMed VPAP Auto 25 Manual Del Usuario

CAUTION
!
•
Be careful not to place the device where it can be bumped or where
someone is likely to trip over the power cord.
•
If you put the device on the floor, make sure the area is free from dust and
clear of bedding, clothes or other objects that could block the air inlet.

Attaching a H4i Humidifier

The H4i humidifier attaches to the front of a VPAP Auto
provide heated humidification. No other accessories are required for its use. These
devices automatically detect the presence of the H4i. No menu changes are required.
Please refer to the H4i manual for details.
WARNING
!
•
Make sure that the water chamber is empty and thoroughly dried before
transporting the H4i.
•
When using the travel bag, always separate the VPAP unit and the H4i and
place the H4i in its pouch.

How to Use the Control Panel

Keypad
Start/Stop Key
The control panel of your VPAP
menus and treatment screens as well as a keypad for navigating through the menus
and delivering treatment. The keypad has the following keys:
Key
Start/Stop
Up
Down
Left
Right
4
device
includes an LCD screen which displays the
Function
Starts or stops treatment. Extended hold for at least three
seconds starts the mask-fit feature.
Allows you to increase settings options and scroll through the
menu.
Allows you to decrease settings options and scroll through the
menu.
Performs the function indicated by the guiding text displayed
above it on the LCD screen. Guiding text includes menu, change,
and apply.
Performs the function indicated by the guiding text displayed
above it on the LCD screen. Guiding text includes exit and cancel
25 or VPAP ST device to
LCD screen
.