Step 4: (Electric Dryer Only) Connect Electrical Plug - Alliance Laundry Systems D009C Instalación/Operación

Installation
Step 4: (Electric Dryer Only) Connect
Electrical Plug
For further assistance, refer to section on Electrical
Requirements.
IMPORTANT: Use only a new U.L. listed No. 10
(copper wire only) three conductor power supply
cord kit rated 240 Volts (minimum), 30 Amperes
and labeled as suitable for use in a clothes dryer.
1
4
THREE-WIRE
1 Typical Receptacle
2 Power Cord
16
2
3
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
NOTE: For more detailed information on
connecting three-wire or four-wire plugs, refer to
section on Electrical Connection.
Four-wire cord is required for mobile homes or
where codes do not permit grounding through
neutral.
D275I
3 Strain Relief Nut
4 Strain Relief
Figure 8
1
2
3
4
FOUR-WIRE
D006I
510975