Step 5: Wipe Out Inside Of Each Dryer; Step 6: Plug In The Dryer Unit; Step 7: Check Installation - Alliance Laundry Systems D009C Instalación/Operación

Installation

Step 5: Wipe Out Inside of Each Dryer

Before using dryer for the first time, use an all-purpose
cleaner, or a detergent and water solution, and a damp
cloth to remove shipping dust from inside dryer drum.
Figure 10
18
D604I
D604I
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Step 6: Plug In the Dryer Unit

Refer to section on Electrical Requirements, and
connect the dryer to an electrical power source.
ELECTRIC
Connect each unit to 30 Amp circuit.
Plug each cord into separately
fused 15 Amp circuit.
Figure 11

Step 7: Check Installation

Refer to Installer Checklist on the back cover and
make sure that dryer is installed correctly.
D254I
GAS
D254I
510975