Operating Your Engine; Fuel Valve - Subaru EH72 FI Manual De Instrucciones

5. OPERATING YOUR ENGINE

NOTE
Following operating method is for
the STD type speed control lever.
As to the fixed type speed control
lever (exp. Generator spec.), do
not move it otherwise the
generator component such as
voltage regulator
damaged.
STARTING

FUEL VALVE

1
(Provided by the equipment
manufacturer)
Open the fuel valve.
SPEED CONTROL LEVER
2
Set the speed control lever 1/3 of
the way towards the high speed
position.
3
may be
If there is a control box mounted,
turn the key switch and set it to the
"RUN" position. Check to make
sure that the warning and other
lights illuminate (red).
■
4
Turn the key switch to the "START"
position.
■
■
■
− 9−
ELECTRIC STARTER
RUN
OFF
RUN
START
When the key switch is set to the
drive position (RUN) the operating
noise of the fuel pump may be
audible for two or three seconds
(this is not a malfunction).
ELECTRIC STARTER
OFF
RUN
START
Do not operate the electric starter
continuously for more than 5
seconds, even if the engine dose not
start.
If the engine failed to start, set the
key to the "RUN" position and wait for
about 10 seconds before retrying.
Never turn the key switch to the
"START" position while engine is
running.
WARNING
LAMP
(Light up)
START