10. PREPARATIONS FOR STORAGE
USE UP THE FUEL
WARNING
If you will not use the engine for more
than 1 month, run the engine until there
is no fuel left, and then store the
equipment in a location with low
humidity in order to prevent start-up
problems and operation trouble due to
deterioration of the fuel.
ENGINE OIL
Change the engine oil with fresh oil.
■
Remove the spark plug, pour about 5
■
cc of engine oil into the cylinder,
slowly start the engine for 2 or 3
seconds, and re-install the spark
plug.
CLEAN AND STORE
Remove the spark plug wires from
■
the spark plugs.
Slowly turn the crankshaft until
■
resistance is felt and leave it in that
position.
Clean the engine thoroughly with an
■
oiled cloth, cover the engine, and
store the engine indoors in a well
ventilated, low humidity area.
− 20−
Flame Prohibited