How-To" Maintenance; Inspecting The Spark Plug; Engine Oil Change - Subaru EH72 FI Manual De Instrucciones

9. "HOW-TO" MAINTENANCE

0.7 to 0.8 mm
(0.03 in)
Oil drain plug
(On both sides)
INSPECTING THE SPARK
PLUG
Clean off carbon deposits on the
■
spark plug electrode using a plug
cleaner or wire brush.
Check electrode gap.
■
Adjust gap to :
0.7mm to 0.8mm (0.03 inches)
Use a proper spark plug :
■
BPR5ES (NGK) or BPR4EY (NGK)

ENGINE OIL CHANGE

Initial oil change
■
・ ・ ・ ・ ・ After 20 hours of operation
Thereafter
■
・ ・ ・ ・ ・ Every 100 hours of operation
1. When changing oil, stop the engine
and loosen the drain plug.
2. Re-install the drain plug before
refilling oil.
3. Refer to the recommended oil table.
(See Section 3 Pre-operation Checks)
4. Always use the best grade and clean
oil. Contaminated oil, poor quality oil
and shortage of oil cause damage to
engine or shorten the engine life.
OIL CAPACITY : 1.55 liter
− 16−