Installation; Introduction; Mounting; Mounting Considerations - RISCO Group WL X312 Instrucciones De Instalación

Introduction

RISCO Group's WL X312 is a unique detector with signal processing based on two Passive Infrared
(PIR) channels. The WL X312 has an adjustable detection range. The detector is compatible with the
RISCO Agility panel.
The following instructions describe the installation of the WL X312.

Mounting

Mounting Considerations

1. Installation Height: 0.8m - 1.2m
Typical Installation Height: 1m (3'3")
2. To ensure maximum operational reliability, install the detector perpendicular to the ground so
that the upper detection area is parallel to the ground.
3. For optimum detection,
select a location that is likely
to intercept an intruder
moving across the coverage
pattern.
4. Avoid pointing the detector to moving
objects (swaying trees, bushes etc.)
4
(2'8" – 3'11")

Installation

With moving objects
keep distance of
minimum 5 meters (16')
5. Ensure any objects do not obstruct the field
of view. Pay attention to growing trees or
bushes, plants with big moving leaves etc.
Installation Manual
5m (16')
Detection Range
Out of