Dyna-Glo DGB730SNB Manual De Instrucciones página 24

OPERATING INSTRUCTIONS
Lighting the Grill with a Match
1. Open the lid.
2. Insert a match in the end of the match holder that is
installed on the inside of the cabinet door.
3. Light the match.
4. Immediately place the lit match through the spaces in
the grill gates near the ports of the burner between the
heat tents as shown. Make sure the lit match is close to
the burner ports..
5. Press in the control knob that operates the burner and
rotate counterclockwise to High position and burner
should light immediately.
6. Repeat 2~5 steps to lighting the remaining burners.
7. Adjust burners to desired cooking settings.
WARNING
Make sure all burner controls are off, except for the
burner being lit and the burners that have been lit.
WARNING
If ignition does not occur in 5 seconds, turn the burner
control(s) OFF O . Wait 5 minutes, and repeat the
lighting procedure.
Shutdown Instructions
1. Turn control knobs
position.
2. Close valve at tank fully by turning clockwise.
3. Close lid.
Turn off LP supply at cylinder when appliance is not
in use.
clockwise to the O "OFF"
LIGHTING MAIN BURNER
24