Tabla de contenido
Publicidad
en
Translation of the Original Operating Instructions
To prevent the lubrication system from posing any risks, the operator must ensure that:
- only qualifi ed personnel work on and with the lubrication system;
- personnel keep the Operating Instructions to hand when carrying out all relevant work and
comply with them;
- the necessary accident prevention and safety regulations are adhered to during installation
or maintenance work;
- the lubrication system is used properly and in accordance with its intended purpose and is
not incorrectly adjusted or modifi ed.
Observe safety data sheets of oil / grease.
Avoid contact of oil / grease with eyes, skin and clothing; also avoid swallowing
of oil / grease.
Prevent oil / grease from getting into soil or sewer system.
Oil / grease on traffi c routes will increase the risk of slipping. Clean the fl oor immediately
using appropriate cleaning agents.
Batteries:
2x
Do not reuse!
Do not expose to fi re!
You may download lubricant data sheets from our web site or ask your local supplier.
We accept no liability for any damages and malfunctions which are caused by inappropriate
usage and inappropriate operations on or with the lubricator.
At the time of delivery, the lubrication system corresponds to the state of the art and, as a
basic principle, is considered safe to operate.
Because of constant product improvements, we reserve the right to make product changes
which do not alter the function of the product, without prior notice.
Protect the environment by recycling valuable raw material according to local regulations.
29
|
perma ULTRA
= Attention: Danger
Do not open!
RECHARGE
RECHARGE
Do not charge!
= Note, tip
A
Cover (re-usable)
B
Filled LC (not refi llable)
C
Battery pack (not re-usable)
D
Drive (re-usable)
Storage conditions
E
Operating temperature
F
Alkaline manganese
G
Lithium
H
Discharge period
I
Shaft orientation
J
Airborne noise emission
K
LED
L
Plug
M
Oil containing waste
N
Display
O
SET button
Discharge amount
P
Pause time
Q
Hold down SET button
R
Release SET button
S
In operation (blinking)
T
U
Empty LC
Installation / Exchange date
V
W
Protection cap Heavy Duty
X
Battery disposal
Drilling template
Y
This manual helps ensure safe working on and with the automatic lubrication system, which is
designed for use in machinery and equipment and which lubricates roller and sliding bearings,
chains, sliding guideways, open gears, etc. with grease.
Upon delivery, make sure to check that the delivered goods correspond to your order.
No liability is accepted for subsequent claims of any defects.
If you have any questions or problems, please contact our customer service team or your
local supplier.
© 2021 - perma-tec GmbH & Co. KG | www.perma-tec.com
1.0
Properties
2.0
Components / Initial assembly
3.0
Handling
3.1 Displays
3.2 Confi guration
3.3 Operating states
4.0
Installation
4.1 Mounting
4.2 Setting into operation
5.0
LC exchange
6.0
Troubleshooting
Error
Cause
Corrective action
7.0
Waste disposal
8.0
Markings
30
|
Publicidad
Tabla de contenido
