Adjusting The Brewing Strength - melitta CAFFEO Manual De Instrucciones

•
Switch the power switch (Fig. B, no. 20) to the "I" position.
•
Press the on/off button
→
The on/off button
symbol for the valve
•
Place a vessel under the Perfect Cappuccino.
•
Place a vessel under the outlet.
• Turn the valve switch (Fig. A, no. 6) clockwise to open the valve.
→
The symbol for the valve
Perfect Cappuccino.
•
When water is no longer discharged and the symbol for the valve
illuminated, turn the valve switch anticlockwise to close the valve.
→
The appliance executes an automatic rinsing process and hot water flows out
of the outlet. Subsequently the on/off button
appliance is ready for operation.

Adjusting the brewing strength

•
Press the button for brewing strength
among four degrees of strength.
→ Your selection is indicated by the bean symbols
Display
•
You can also change the coffee flavour via the fineness level of the grin-
der. See page 62.
to switch the appliance on.
flashes. The appliance heats up. After heating up the
will be illuminated.
is flashing. Water runs into the vessel under the
Brewing strength
Mild
Normal
(factory setting)
Strong
Very strong
will be illuminated. The
several times to select from
in the display.
is
51