Residual Risks; Know Your Product - Ryobi RLT254CDSO Manual De Utilización

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and
the operator should pay special attention to avoid the
following:
■ Injury caused by vibration.
– Always use the right tool for the job, use designated
handles and restrict working time and exposure.
■ Exposure to noise can cause hearing injury.
– Wear ear protection and limit exposure.
■ Eye injury due to flying debris.
– Wear eye protection at all times.
RISK REDUCTION
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
numbness and blanching of the fi ngers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices
are all thought to contribute to the development of these
symptoms. It is presently unknown what, if any, vibrations
or extent of exposure may contribute to the condition.
There are measures that can be taken by the operator to
possibly reduce the effects of vibration:
■ Keep your body warm in cold weather. When operating
the product wear gloves to keep the hands and wrists
warm.
■ After each period of operation, exercise to increase
blood circulation.
■ Limit the amount of exposure per day. Take frequent
work breaks.
■ If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged
periods, ensure you take regular breaks.

KNOW YOUR PRODUCT

1. Primer bulb
2. Choke lever
3. Fuel cap
4. Starter grip
5. Throttle lock
English (Original instructions)
6. Ignition switch
7. Throttle trigger
8. Rear handle
9. Front handle
10. Shaft
11. Grass deflector
12. ReelEasy™ string head
13. Cutting line
14. Idle speed screw
15. Knob
16. Hanger cap
17. Bolt
18. Wing nut
19. Flat washer
20. Wrench
21. String head cover
22. Bump knob
23. Hex bolt
24. Spool
25. Spring
26. String head housing
27. Air box cover
28. Air filter
29. Combination wrench
30. Spark Plug
31. Guide recess
32. Button
33. Metal spark plug boot
34. Rubber protect boot
35. Starter bit
36. Electrical starter
37. F/R button
38. Starter bit shaft
39. Shaft hole on the engine
40. Switch button
ASSEMBLY
UNPACKING
This product requires assembly.
■ Carefully remove the tool and any accessories from
■ Inspect the tool carefully to make sure no breakage or
■ Do not discard the packing material until you have
If any parts are damaged or missing do not operate the
product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
19
the box. Make sure that all items listed in the packing
list are included.
damage occurred during shipping.
carefully inspected and satisfactorily operated the tool.
WARNING