Marklin Digital 60940 Manual Del Usuario página 34

CV
Explanation
19 Multiple unit address
21 PoM Functions F1 - F8 when using multiple unit
22 PoM Functions FL, F9 - F15 when using multiple unit
Braking mode:
Bit 0 - 3 : always 0,
27 PoM Bit 4 : DC voltage, polarity against the direction of travel
Bit 5 : DC voltage, polarity with the direction of travel
Bit 6 - 7 :
Configuration:
Bit 0 : reverses direction properties of the locomotive
0 = normal direction, 1 = inverse direction
Bit 1 : speed level 14 or select 28/128
29 PoM 0 = 14 speed levels, 1 = 28/128 speed levels
Bit 2 : turn analog operation off/on
0 = analog off, 1 = analog on
Bit 5 : select short / long address
0 = short address, 1 = long address
PoM must be supported by the locomotive controller / central controller.
34
CV Table for DCC
Values Default
0 - 255
0 - 255
0 - 255
0 - 48
0
0 / 16 48
0 / 32
0
0 - 39
0 / 1
0 / 2
0 / 4
0 / 32
Notes
1 - 127 = multiple unit address
0 = no multiple unit
0
+128, Bit 7 = reverse polarity for direction
when using multiple unit
0 = func. # only for locomotive address
0 1 = func. # also for multiple unit address
Bit 7-0 = [ F8 F7 F6 F5 F4 F3 F2 F1 ]
0 = func. # only for locomotive address
0 1 = func. # also for multiple unit address
Bit 7-0 = [ F15 F14 F13 F12 F11 F10 F9 FL ]
Braking subject to direction:
- only Bit 4 : normal DC properties
- only Bit 5 : inverse DC properties
Braking not subject to direction:
- Bit 4 + 5 : 3 rail properties
The direction properties refer to the
direction of travel and the lights. The
number of speed levels and the light bit
depend on the locomotive controller.
6
Either the short main address or the
long expanded address as a locomotive
address.