The wizard then begins a search for drivers for the U.S. Robotics V.92 PCI Modem.
5.
Install the U.S. Robotics V.92 PCI Modem as follows.
A.
Click Next.
B.
Select Search for the best driver for your device (Recommended) and click Next.
C.
Select CD-ROM and click Next.
D.
When Windows locates the correct drivers for the U.S. Robotics V.92 PCI Modem,
click Next.
When Windows is finished installing the drivers, click Finish.
E.
Windows 95
NOTE: If at any time during the installation you are prompted to select the loca-
tion of your installation drivers, select the following location on the Installation
CD-ROM (assuming D: is your CD-ROM drive):
D:\
1.
Reconnect your computer and peripherals and turn your computer on.
2.
Insert the Installation CD-ROM into your CD-ROM drive before Windows opens. You
need to install both the U.S. Robotics V.92 PCI Modem Enumerator and the U.S. Robot-
ics V.92 PCI Modem.
3.
When the New Hardware Found or Update Device Driver Wizard appears, follow the on-
screen instructions.
Install the Software.
Insert the Installation CD-ROM into your CD-ROM drive. The Installation CD-ROM window
should automatically appear.
If your Installation CD-ROM is already in the drive, and the Installation CD-ROM interface is
not displayed, eject and reinsert the Installation CD-ROM. If the CD-ROM interface still does
not appear, click Windows Start and then Run. Type D:\setup.exe in the "Run" dialog box. (If
your CD-ROM drive uses a different letter, type that letter in place of "D.")
Install the Instant Update software.
The Instant Update software automatically notifies you of any updates to your modem's
code.
To Install the Instant Update Software:
1.
At the Installation CD-ROM interface, click Software.
2.
Select Instant Update and click Install.
3.
Follow the on-screen instructions to install the Instant Update software.
Install the Internet Call Notification software.
Internet Call Notification enables the V.92 feature, "Modem On Hold," which allows you to
suspend your Internet connection when there is an inbound telephone call. If you are con-
necting to a service provider that supports V.92, you will receive a message informing you of
4