Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION:
Y
• Read the instruction manual before using the machine.
• This device complies with the safety requirements in force for electrical machinery.
• Improper use may cause injury and damage. People who are not familiar with the instruction manual must not use
the machine. Keep this instruction manual.
1. Keep the work area clean. Crowded work areas and benches can result in injuries.
2. Avoid dangerous environments. Do not expose power tools to rain or use them in damp or wet areas. Keep the work area
well lit. Do not use the tool in the presence of flammable gases or liquids.
3. Protect yourself from electric shocks. Avoid contact with earthed surfaces.
4. Keep visitors and children away. All children and visitors should be kept at a safe distance from the work area.
5. Put away unused tools. Tools must be stored in a dry and locked place that is out of the reach of children when they are not
being used.
6.Do not force the tool. It will do the job better and more safely at the rate for which it was designed.
7. Use the tool best suited to the task according to its size and performance. Do not force a small tool to do the job of a heavy
duty tool. For example, do not use a circular saw to cut limbs or logs.
8. Wear appropriate clothing. No loose clothing or jewellery that can be caught in the moving parts. Non-slip footwear is
particularly recommended for outdoor work. Long hair must be protected.
9. Always wear safety glasses. Wear a mask as well if the operation creates a lot of dust.
10. Connect the dust-vacuuming collecting equipment. If a dust collection device is provided, make it is properly connected
and used.
11. Do not mishandle the cord. Never pull on the cord in order to disconnect it from the socket. Keep the cord away from heat,
oil and sharp edges.
12. Secure the piece of wood you are working on. Whenever possible, use clamps or a vice to secure the piece of wood. Do not
hold down the wood with your hands.
13. Do not lean over the tool. Keep your balance at all times.
14. Keep tools in good condition. Keep tools sharp and clean for optimal results in complete safety. Follow instructions for
lubricating and changing accessories. Regularly check the cord and replace if damaged. Keep handles dry, clean and free of oil
and grease.
15. Unplug the tool when not in use, before servicing and when changing accessories such as blades, bits, milling cutters, etc.
16. Remove keys and adjusting wrenches. Make it a habit to check that keys and adjusting wrenches have been removed
from tool before turning it on.
17. Avoid accidental starting. Make sure the switch is "OFF" before plugging the tool into the socket.
18. Use extension cords designed for outdoor use. When using the tool outdoors, only use extension cords designed for out-
door use and bearing indications to that effect.
19. Stay alert. Do not use the tool if you are tired or under the influence of alcohol or drugs.
20. Inspect parts for damage. Before continuing to use the tool, inspect all guards or any other part that may be damaged to
ensure they work well and perform their intended task. Make sure that moving parts are properly aligned, do not catch and
are not broken. In addition, check the assembly or any other condition that may affect its operation. Any damaged part or
guard must be repaired or replaced by an approved after sales service centre. Do not use the tool if the switch does not work
correctly.
SAFETY RULES FOR TOOLS
23
Publicidad
Capítulos
