Identification Of The Machine; Anschluß An Die Stromquelle - PEUGEOT Energysaw 254DB Instrucciones De Utilizacion

A.Start/stop handle
B.On/off switch for the laser
C.On/off trigger switch
D. Saw Blade
E.Lower blade guard
F.Double beam laser
G.Table extension wings
H.Saw table
I.Table insert
J.Table rotation handle
K. Rotary table scale
L. Cut stop guide
Y
CAUTION: Make sure the saw is turned off and unplugged from any power source before proceeding with the assem-
bly or performing any other adjustment.
1. ASSEMBLING THE TABLE ROTATION HANDLE
You must mount the table rotation handle before you can use your dual bevel mitre saw(A) Fig.2.
To do this, screw in the handle (A). This handle is used to lock the table at the desired angle for mitre cuts.

IDENTIFICATION OF THE MACHINE

M.Guide locking handle
N.Clamp
O.Saw head bevel locking handle
P.Saw head slide mechanism
Q.Dust bag
R.Mitre angle scale
S.Depth stop
T. Upper blade guard
INSTALLATION
29
1