Features - Bostitch CAP6080WB Manual De Operación Y De Mantenimiento

FEATURES OF THE BOSTITCH CAP6080WB
A. Tank Pressure Gauge: The
B
tank pressure gauge indicates
C
the air pressure that is present in
the tank in PSI (lbs/sq. in.).
D
A
B. Regulated Pressure Gauge:
J
The regulated pressure gauge
indicates the amount of pressure
E
that is allowed into the two
discharge lines (E) according to
the setting of the regulator.
C. Regulator Knob: The regulator
knob is used to adjust the air
pressure that is available at the
two discharge lines. The
discharge air pressure is increased by turning the knob clockwise and decreased by turning
the knob counter clockwise.
D. Discharge Ports: This compressor is equipped with two discharge ports. These ports are
below the regulated pressure guage and are machined with a 1/4-18 NPT thread to allow the
end user to attach the appropriate style fitting for the application.
E. Drain Cocks: Twist style valves that drain moisture from the tanks when they are opened.
F. Oil Drain Plug: By removing the oil drain plug, oil can be drained from the compressor
crankcase.
G. Oil Fill Plug: Turn counter clockwise to remove
prior to adding oil.
G
H
H. Oil Fill Tube: When adding oil to the unit, it is
poured into this opening. The opening is designed
to act as a funnel to make filling easier and cleaner.
I
I. Sight Glass: See-through so that the user can
quickly and easily verify the oil level prior to
operation.
J. Pet Cock: Twist style valve used for cold starting
or if system is under pressure.
F
6