Bowl Rinsing; Lamp Operation; Service Push-Button - eurodent Iso Plus Manual Del Usuario

9

BOWL RINSING

10

LAMP OPERATION

11

SERVICE PUSH-BUTTON

The bowl flush starts automatically following the tumbler filler
stop, and stops automatically when the programmed time has
elapsed. To change the programmed time, see the section:
"PARAMETERS PRESETTING".
To start the bowl flush independently from the tumbler filling,
press the green key:
otherwise, turn the ring located on the tip-holder arm.
The lamp can be switched on by photocell or by switch. The unit
should be properly programmed just as the lamp installation.
The green key:
switches the lamp on. The lamp can also be switched on and
off from the Foot-control lever, by pushing it leftward when the
instruments are in resting array.
The green key:
closes any low voltage external circuit ("max 24 V - 1 A") for the
assistant call, door opening, and so on.
BOWL
LAMP
SERVICE
39