Removing And Cleaning The Filter; Removing The Amalgam Separator Vessel - eurodent Iso Plus Manual Del Usuario

REMOVING AND CLEANING THE FILTER

REMOVING THE AMALGAM SEPARATOR VESSEL

M U
L T IS
B
M U
L T IS
Y S
T E
M
Y S
T E
M
Fig. 1
A
Fig. 2
In order to take out the box filter, follow the easy and short indications
hereunder described.
Firstly, remove the threaded cap placed on the centrifuge. Then, take
out filter by pulling it outwards.
Now, proceed to clean it, by keeping it under lukewarm water so as to
remove all waste. Then, carry out the same operations backwards, by
inserting the filter and taking care of placing it properly on its guides.
Finally, screw the cap carefully.
When the illuminated yellow lamp signals that the complete filling up
of the amalgam vessel has been reached, it is necessary to remove
the container from its housing and replace the tank, in order to restore
the proper working of the equipment.
So as to carry out this last operation, lift the releasing handle placed
on the front side of the separator (picture 1).
After releasing the separator from the plate, take the body out of its
sliding guides, simply by pulling it outwards (picture 2/A).
After removing the whole container, you can proceed to dismount the
tank, by releasing the fixing hinges placed on the sides of the vessel
(picture 2/B). Then, replace tank by a new, supplied one.
METASYS
METASYS
59