Maintenance; Module-Holder Arm Balancing - eurodent Iso Plus Manual Del Usuario

18

MAINTENANCE

MODULE-HOLDER ARM BALANCING

When modules are added or removed, as well as side tray, it is
necessary to balance the arm tension and to adjust its
horizontality.
To access the mechanism, move the sheath towards the
module-holder, so that the carters get uncovered.
Push the sides of the cover so as to release its cogtongues, and
pull upwards.
By rotating clockwise the spring Allen head, the arm shall hold
a heavier weight; by rotating the same counterclockwise, the
arm shall hold a lighter weight.
To settle the module-holder horizontality (longitudinal direction),
loosen the two nuts of the hexagon bar. Then, by rotating it
clockwise, the keyboard profile shall tilt upwards; by rotating it
counterclockwise, the keyboard profile shall tilt downwards.
Do not forget to tighten the two reinforcing nuts.
53