EMPTYING THE WASTE COLLECTOR
b
a
SURFACE CLEANING
To empty the waste collector, use a disposable cup of the type
supplied with the unit.
Place a large bowl under the collector and twist it out as
indicated from arrow a.
Fig.1
Cover the collector with the disposable cup, with the bottom
side up.
Fig.2
Pressing the collector and the cup well together to prevet
dripping, turn upside down and wait until all the waste has sunk
from the collector into the disposable cup.
Fig.3
Close tightly the disposable cup with its cover, and twist the
collector back into its seat as indicated from arrow b (see fig. 1).
Fig.4
Sanitizing liquid for plastics is recommended for surface
cleaning.
Handpieces tubings must be cleaned with water and neutre
soap, and then must be well dried and lightly spread with
talcum powder.
The chair and stool upholsteries must be cleaned with
water and neutre soap.
MAINTENANCE
MAINTENANCE
57