Rs232 Output; Basic Information; Normal Output; Continuously Output Protocol - Baxtran BR20 Manual De Usuario

User's Guide
The ba ery should be charged for 12 hours for full capacity.
Just under the quan ty display is an LED to indicate the status of ba ery charging. When the scale is plu-
gged into the mains power the internal ba ery will be charged. If the LED is green the ba ery has a full
charge. If it is Red the ba ery is nearly discharged and yellow indicates the ba ery is being charged.
As the ba ery is used it may fail to hold a full charge. If the ba ery life becomes unacceptable then contact
your distributor.
The BR30 can be ordered with an op onal RS232 output.

9.1. BASIC INFORMATION

Specifica ons:
RS232 output of weighing data.
ASCII code.
7/8 data bits.
Parity setable.
Baud rate from 600bps to 9600bps.

9.2. NORMAL OUTPUT

Data format for normal weighing opera ons, parts coun ng or recalling of totals from memory will all be
different.
Examples follow:
Normal output
S/N The number increments every me a new value is stored in memory.
GW GW for gross weight, NT for net weight and a unit of weight
<If>
Includes 2 line feeds.
<If>
When recalling the total weight stored in the accumula on memory the output format is:
****************
<If>
Total No:
Total wt:
****************

9.3. CONTINUOUSLY OUTPUT PROTOCOL

con1: weighing mode
| 1
Header
nator |
Header1: ST=STABLE, US=UNSTABLE
Header2: NT=NET, GS=GROSS
The calibra on can be only done by the authorized technical personnel, please, if you wish do a calibra on
contact with your authorized calibra on organism who is authorized to seal and to unseal the scale.
In order to enter the calibra on parameter it is necessary to short the K2 jumper K2 of the main keyboard.
Turn the power off.
28
A line of stars is shown.
Includes 1 line feed.
3 Times of the accumula on memory.
0.447kg
Weight of the accumula on memory.
, - /
| 2 |
Header

10. CALIBRATION (ONLY AUTHORIZED PERSONAL)

Connector: 25 pin d-subminiature socket.
Pin 2: Input.
Pin 3: Output.
Pin 5: Signal Ground.
Weight data
BR20 - BR30 model

9. RS232 OUTPUT

k g CR LF
| | | | termi-
Weight unit