Error Code; Warranty - Baxtran BR20 Manual De Usuario

BR20 - BR30 model
Turn the power back on, during the coun ng from 9 to 0 press the
The display will show
The display wil show the first func on,
press to select CAL, press
Remove any weight from the pla orm. A er stable indicator on, press the
Then the display will show the last calibra on weight used. If this is correct you can con nue by pressing
the key. If it is not correct use the
is correct press the
Then display will show LoAd. Place the calibra on weight on the scale. A er stable press the
If the calibra on is acceptable the display will return to normal. If an error message is shown try calibra on
again as a disturbance may have prevented a successful calibra on.
If the problem persists then contact your dealer.
A er calibra on, itshould be checked to verify the calibra on and linearity is correct. If necessary repeat
calibra on, especially be certain the scale is stable before accep ng any weight.
ERROR
DESCRIPTION
CODES
- - - - - Over range
Zero Se ng Error
Err4
A/D out of range
Err6
This scale is warranted against defects of manufacturing and materials for a period of 1 year, from the de-
livery date.
During this period, GIROPÈS SL will take charge of repairing the scale.
This warranty does not cover defects or damaged caused by misuse, overloading or improper installa on
contrary to the recommenda ons described in this manual.
This warranty does not cover shipping costs for the repara on of the balance.
Pn
(ask password), press
PO CHk. Press
key to enter calibrate. The display will show UnLd.
key.
RESOLUTION
Remove weight from the indicator.
If the problem persist contact your dealer for assistance.
The indicator was outside the normal zero se ng range either when it was
turned on or when the
Remove weight from the scale and try again.
Use the
If the problem persist contact your dealer for assitance.
The values from the A/D converter are outside the normal range. Remove
weight from the scale if overloaded, make sure the pan is a ached.
Indicates the load cell or the electronics may be faulty.
If the problem persist contact your dealer.
key.
to enter.
un l display show
keys to change the calibra on weight value. When it
key was pressed.
key to set the display to zero value.
User's Guide
P2 CAL, press
to enter,
key.
key.

11. ERROR CODE

12. WARRANTY

29