Overview Of Operating Elements; Positioning The Floor Saw - TYROLIT Hydrostress FSE1240 Serie Instrucciones De Servicio

TYROLIT Hydrostress AG
6 Operation

6.1 Overview of operating elements

6.2 Positioning the floor saw

Page 12
Operating elements
1 Ammeter
2 Operating hours meter
3 Cutting depth indicator
4 Bit stop locking
5 Rotary field warning lamp
6 Start button
7 EMERGENCY STOP switch
8 Reset button
1. Release the hand brake.
2. Slide floor saw into the working position.
3. Fit the cutting guides to the floor saw.
9 Rotating field selector switch
10 On / Off control for internal
water pump
11 On / Off control for headlight
12 Raise / Lower buttons
13 Feed adjuster (forward /
backward travel)
14 Key-operated switch
15 Feed gears coupling lever
16 Hand brake
Floor Saw FSE1240