Adjusting The Feed - TYROLIT Hydrostress FSE1240 Serie Instrucciones De Servicio

TYROLIT Hydrostress AG

6.6 Adjusting the feed

Page 16
Symbol
Feed adjuster is in the neutral position
Hand brake has been released
1. Place coupling lever (1) in the coupled position.
2. Using the feed adjuster (2), set the direction of travel and speed.
Significance
Coupling lever in coupled position
Coupling lever in uncoupled position
Feed adjuster in the forwards direction of travel
Feed adjuster in the backwards direction of travel
Floor Saw FSE1240