Playing The Alpha Track (Real Time Sampler) - Denon DN-S5000 Instrucciones De Operación

7

PLAYING THE ALPHA TRACK (Real Time Sampler)

• The Alpha-Track function lets you play one more track (the Alpha-Track) while playing the Main Track.
• The Alpha-Track's pitch and sound level can be adjusted.
• You can switch output channel of Alpha-Track sounds from MAIN OUT (default) or ALPHA OUT with the
presets.
• You can use this function like a Sampler from Alpha-Cue point (Real time Sampler). When the ALPHA OUT is
selected, DN-S5000 can playback up to two songs simultaneously.
• When playing the Alpha-Track, scratching, Hot Starting, Seamless Looping (Alpha-Track and Hot Start modes)
and Hot Disc are possible in the same way as with the Main Track.
NOTE: The Sampler and Alpha-Track functions cannot be used simultaneously.
★
q, r,
u, i
★
w, e
i
t
y
★
Enter Alpha-Track mode
q When Main Track is in the
SAMP. STOP
standby or playing, push
the a CUE button to set
the Alpha-Cue point. The
a CUE button lights up
red.
• When Alpha-Cue is set during standby at
1
the Main Track, playback of the Main
Track starts.
• The display can be switched between
the Main Track and Alpha-Track using the
@7 DISPLAY button.
When " Alpha-Track display" is selected,
" PARAMETERS" is set to the alpha-
track pitch input mode.
Start Alpha-Track playback
w Push the a 13
button to
start Alpha-Track playback.
When playback starts, the
a
13 button lights up
green.
• When the scratch mode is set for the
2
Alpha-Track, the Platter turns when the
Alpha-Track is played.
The pause mode is set when the rotation
of Scratch Disc is stopped by pressing
with the finger while the Platter is
turning, and playback resumes when the
finger is released.
Pause Alpha-Track playback
e During Alpha-Track
playback, push the a 13
3
button to pause playback.
When the pause mode is set, the a 13
button starts flashing.
Back Cue Alpha-Track playback
r In the Alpha-Track
SAMP. STOP
playback or pause mode,
push the a CUE button to
4 Back-Cue. The a CUE
button lights up red.
NOTE: That the Alpha-Cue point is not
changed automatically with start
playback.
Alpha-Track pitch bend 1
[a (Alpha) PITCH BEND +/– buttons]
t Push the a PITCH
BEND – or + button
for momentary change
PI ND
of pitch.
5
-1
While holding these buttons down, the
pitch continues to change up to the
limitation.
• After releasing the a PITCH BEND
buttons, playback pitch returns to slider
setting.
Alpha-Track pitch bend 2
[Scratch Disc]
y When the Scratch source
is set to Alpha-Track and
the Platter is turning, playback of the
5
-2
Alpha-Track can be slowed temporarily by
lightly pressing Scratch Disc or Platter.
In addition, playback can be quickened
temporarily by pushing Scratch Disc or
Platter in the direction in which the Platter
is turning.
Stutter play the Alpha-Track SAMP. STOP
u In the Alpha-Track standby
6
mode, push the a CUE
button to start stuttering.
Clear Alpha-Track
i While pushing the a PITCH BEND – button,
push the a CUE button to clear the Alpha-
Cue point.
7
SAMP. STOP
PI H BEND
ENGLISH
Adjust sound level and pitch
The Alpha-Track and Sampler playback sound
level and pitch can be adjustable.
★ (1) Push the PITCH/VOL button for more
than 1 sec, the pitch input mode is
selected, PARAMETERS LED flashes
and the current settings are displayed
on the character display.
(2) Push the PITCH/VOL button again to
selected the sound level output mode.
(3) Start Alpha-Track or Sampler playback.
8
(4) Turning the PARAMETERS knob can
change the sound level or pitch.
✽ When pushing down and turning the
PARAMETERS knob, you can change
the pitch range 10 times faster.
(5) Push the PITCH/VOL button again to
turn the playing parameter mode off.
Unless you adjust Alpha-Track pitch separately,
the Alpha-Track's pitch will be the same as your
Main Track. In this case, pitch of both Main
Track and Alpha-Track changes together when
you move the main Pitch Slider
13